PCE-TG 300-HT5
Ultrasonic Thickness Tester PCE-TG 300-HT5
- Measuring range: 1 … 600 mm / 0.039 … 23.62″ (steel)
- Diameter: 12mm / 0.47″
- Minimum diameter of pipes: 30 mm / 1.18″
- Frequency: 5MHz
The PCE-TG 300-HT5 is an ultrasonic thickness tester designed with special sensors for various applications. It measures the wall thicknesses of all homogeneous materials. For damping or scattering materials such as plastic or cast metal, a special sensor is available. An angled 90° sensor allows measurements at hard-to-reach points. Users can freely set the speed of sound on the thickness meter, making it adaptable to a wide range of materials.
Measured values are displayed directly on the easy-to-read TFT color display. The internal memory, accessible via optional software, allows for clear storage of different measuring points. This non-destructive ultrasound measuring method enables measurement even on finished products. With the Echo-Echo mode (available only with the PCE-TG 300-P5EE sensor), it can measure even coated workpieces.
HIGHLIGHTS
- Large measuring range
- Various sensors available
- Battery operation
- Error and void detection
- Internal measurement data memory
- Print via Bluetooth
| PCE-TG-HT5 sensor | |
| Measuring range | 1 … 600 mm / 0.039 … 23.62″ (steel)” |
| Minimum diameter of pipes | 30 mm / 1.18″ |
| Frequency | 5 MHz |
| Diameter | 12 mm / 0.47″ |
| Description | for high temperatures (max. 300 °C / 572 °F) |
| PCE-TG 300-HT5 device | |
| Measuring range | P-E: pulse-echo mode 0.65 … 600 mm / 0.025 … 23.62″ (steel)” |
| (measurement range varies depending on the sensor) | |
| E-E: Echo-Echo mode 2.50 … 100 mm / 0.098 … 2.36″ (only with PCE-TG 300-P5EE sensor) |
|
| Accuracy | ±0.04 mm H[mm] (<10 mm); ±0.4 % H[mm] (>10 mm) |
| H refers to the material thickness of the workpiece | |
| Resolution | 0.1 mm / 0.01 mm / 0.001 mm (adjustable) |
| Measurable materials | metals |
| plastics | |
| ceramics | |
| epoxy resin | |
| glass | |
| and all homogeneous materials | |
| Working modes | Pulse-echo mode (fault and void detection) |
| Echo-echo mode (hide layer thicknesses, e.g. paint) | |
| Calibration | sound velocity calibration |
| zero calibration | |
| two-point calibration | |
| View Mode | Normal Mode, Scan Mode, Difference Mode |
| Units | mm / inch |
| Data transfer | printing via Bluetooth / USB 2.0 |
| Memory | non-volatile memory with 100 data groups with 100 data sets each |
| Operating time | continuous operation 100 h |
| automatic stand-by mode (adjustable) | |
| auto power off mode (adjustable) | |
| Power supply | 4 x AA battery 1.5 V |
| Display | 320 x 240 pixels TFT LCD color display with brightness adjustment |
| Operating conditions | 0 … +50 °C / 32 … 122 °F, ≤80 % RH non-condensing |
| Storage conditions | -20 … +70 °C / -4 … 158 °F, ≤80 % RH non-condensing |
| Dimensions | 185 x 97 x 40 mm / 7.2 x 3.8 x 1.5″ |
| Weight | 375 g / 13.2 oz |
1 x Ultrasonic thickness tester PCE-TG 300-HT5
1 x Sensor PCE-TG-HT5
1 x 100 ml coupling gel
1 x Transport case
4 x AA batteries
1 x User manual
ACCESSORIES
ISO Calibration Certificate for Material Thickness Meter
Ultrasonic Contact Gel (100 ml)
K-Gel High-Temperature Coupling Gel
Step Calibration Block (4) PCE-TG-BLOCK
Sensor PCE-TG 300-HT5 (5 MHz)
Sensor PCE-TG 300-NO7 (7 MHz)
Sensor PCE-TG 300-NO5/90 (5 MHz)
Sensor PCE-TG 300-NO5 (5 MHz)
Sensor PCE-TG 300-NO2 (2.5 MHz)
Sensor PCE-TG 300-P5EE (5 MHz)
PC software with USB cable for PCE-TG 300
NB: ACCESSORIES CHARGES ARE EXTRA
