Order no.: PCE-CT 100N
Coating Thickness Gauge PCE-CT 100N
- Measuring range: 0 … 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two probes for NFe and Fe
The surface tester operates using the magnetic inductive method (ISO 2178) and the eddy current method (ISO 2360). These methods allow for non-destructive material testing. The surface tester measures the thickness of magnetically neutral layers on magnetic or non-magnetic base materials.
This tester is perfect for reliable on-site layer thickness measurements. Its external probe enables quick and easy measurements, even in hard-to-reach places. Designed for non-destructive, fast, and precise measurements, the surface tester is easy to use. You can transfer measured data to a PC via a USB storage device or WiFi.
The surface tester is particularly useful in industries such as finishing, electroplating, ship and bridge construction, aircraft construction, and the machine and chemical industries.
HIGHLIGHTS
- Illuminated touch keyboard
- Measurement data storage for up to 1260 data
- One-point and multi-point calibration
- Single measurement and continuous measurement
- Data transfer via wifi and USB
- Two different probes for NFe and Fe
| Measuring range | 0 … 1250 µm; 0 … 49.2 mil |
| Min. coating thickness of base material | 50 µm |
| Smallest measuring surface (diameter) | 10 mm |
| Min. radius of curvature convex | 15 mm |
| Min. radius of curvature concave | 15 mm |
| Accuracy | ± (1% + 1 µm); ± (1% + 0.04 mil) |
| Resolution | 0.1 µm (<99.9 µm); 0.004 mil (<3.9 mil) |
| 1 µm (> 100 µm); 0.04 mil (> 3.9 mil) | |
| Calibration | Single point, multiple point |
| Data storage | 1260 data |
| Measuring modes | Single measurements, continuous measurement |
| Interfaces | Wifi , USB |
| Operating conditions | 0 … 50°C / 32 … 122°F, 20 … 90% RH non-condensing |
| Dimensions | 170 x 85 x 35 mm / 6.7 x 3.3 x 1.4 in |
| Weight | Approx. 335 g / < 1 lb (with battery) |
1 x Coating thickness gauge PCE-CT 100N
1 x NFe probe
1 x Fe probe
1 x USB data carrier
1 x Reference film set
1 x Calibration plate (ferrous)
1 x Calibration plate (non-ferrous)
2 x 1.5V AA batteries
1 x Instruction manual
