loader image

PCE-TG 300-P5EE

Ultrasonic Thickness Tester PCE-TG 300-P5EE

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62″, E-E: 2.5 … 100 mm / 0.09 …3.93″
  • Diameter: 10mm / 0.39″
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118″

The PCE-TG 300-P5EE is an ultrasonic thickness tester equipped with special sensors for various applications. It measures the wall thicknesses of all homogeneous materials. For damping or scattering materials such as plastic or cast metal, a special sensor is available. An angled 90° sensor allows measurements at hard-to-reach points. The speed of sound can be freely set on the thickness meter, making it adaptable to a wide variety of materials.

Measured values are displayed directly on the easy-to-read TFT color display. The internal memory, which can be accessed via optional software, allows for clear storage of different measuring points. The non-destructive ultrasound measuring method enables measurement even on finished products. Using Echo-Echo mode, it can measure even coated workpieces.

HIGHLIGHTS

  • Large measuring range
  • Various sensors available
  • Battery operation
  • Error and void detection
  • Internal measurement data memory
  • Print via Bluetooth
PCE-TG-P5EE sensor
Measuring range P-E: 2 … 600 mm / 0.078 … 23.62″, E-E: 2.5 … 100 mm / 0.098 …3.937″
Minimum diameter of pipes 20 x 3 mm / 0.787 … 0.118″
Frequency 5 MHz
Diameter 10 mm / 0.39″
Description normal measurement and E-E test
PCE-TG 300-P5EE device
Measuring range P-E: pulse-echo mode 0.65 … 600 mm / 0.025 … 23.62″ (steel)
E-E: Echo-Echo mode 2.50 … 100 mm / 0.098 … 2.36″
Accuracy ±0.04 mm H[mm] (<10 mm); ±0.4 % H[mm] (>10 mm)
H refers to the material thickness of the workpiece
Resolution 0.1 mm / 0.01 mm / 0.001 mm (adjustable)
Measurable materials metals
plastics
ceramics
epoxy resin
glass
and all homogeneous materials
Working modes Pulse-echo mode (fault and void detection)
Echo-echo mode (hide layer thicknesses, e.g. paint)
Calibration sound velocity calibration
zero calibration
two-point calibration
View Mode Normal Mode, Scan Mode, Difference Mode
Units mm / inch
Data transfer printing via Bluetooth / USB 2.0
Memory non-volatile memory with 100 data groups with 100 data sets each
Operating time continuous operation 100 h
automatic stand-by mode (adjustable)
auto power off mode (adjustable)
Power supply 4 x AA battery 1.5 V
Display 320 x 240 pixels TFT LCD color display with brightness adjustment
Operating conditions 0 … +50 °C / 32 … 122 °F, ≤80 % RH non-condensing
Storage conditions -20 … +70 °C / -4 … 158 °F, ≤80 % RH non-condensing
Dimensions 185 x 97 x 40 mm / 7.2 x 3.8 x 1.5″
Weight 375 g / 13.2 oz

1 x Ultrasonic thickness tester PCE-TG 300-P5EE
1 x Sensor PCE-TG-P5EE
1 x 100 ml coupling gel
1 x Transport case
4 x AA batteries
1 x User manual


ACCESSORIES

ISO Calibration Certificate for Material Thickness Meter
Ultrasonic Contact Gel (100 ml)
K-Gel High Temperature Coupling Gel
Step Calibration Block (4) PCE-TG-BLOCK
Sensor PCE-TG 300-HT5 (5 MHz)
Sensor PCE-TG 300-NO7 (7 MHz)
Sensor PCE-TG 300-NO5/90 (5 MHz)
Sensor PCE-TG 300-NO5 (5 MHz)
Sensor PCE-TG 300-NO2 (2.5 MHz)
Sensor PCE-TG 300-P5EE (5 MHz)
PC software with USB cable for PCE-TG 300

NB: ACCESSORIES CHARGES ARE EXTRA

Scroll to Top

Add to Quote