METERIVA Digital AC/DC Clamp Meter (T-RMS) MR-CM34

Environmental conditions: 600V CAT III, pollution level: II
Altitude < 2000 m.
Working environment temperature and humidity: 0~40°C (<80% RH, not considered when <10°C).
Storage environment temperature and humidity: -10~60°C (<70% RH, remove the battery).
Temperature coefficient: 0.1 accuracy / ° C (<18° Cor > 28°C).
Maximum voltage allowed between the measuring terminal and the earth: 600V DC or 600V AC RMS.
Sampling rate: about 3 times/sec.
Display: 5999 digit LCD.
Over range indication: The LCD will display “OL” or “-OL”.
Battery low voltage indication: When the battery voltage is lower than the normal working voltage, “ ” will be displayed on the LCD.
Input polarity indication: ” – ” is automatically displayed.
Power: AAA DC 1.5Vx2 section.
Dimensions: 191mm × 70mm × 37mm.
Weight: about 190g (without battery).
Jaw opening maximum size: 25mm

Weight	0.19 kg

FUNC	RANGE	ACCURACY	Resolution
DCV	600mV	±(0.8% rdg + 3 dgt)	0.1mV
	6V		0.001V
	60V		0.01V
	600V	±(1% rdg + 3 dgt)	0.1V
ACV	6V	±(1.2% rdg + 5 dgt)	0.001V
	60V		0.01V
	600V		0.1V
	200-600V (V.F.C)	±(1.5% rdg + 10 dgt)	1V
Low Voltage	600V	±(0.8% rdg + 5 dgt)	0.1V
ACA	60A	±(3% rdg + 10 dgt)	10mA
ACA	600A	±(4% rdg + 10 dgt) VFC	100mA
DCA	60A	±(3% rdg + 10 dgt)	10mA
DCA	600A	±(3% rdg + 10 dgt)	100mA
OHM	600Ω/6KΩ/60KΩ/600KΩ/6MΩ	±(1.2% rdg + 2 dgt)
OHM	60MΩ	±(2% rdg + 5 dgt)
CAP	60nF/600nF/6µF/60µF/600µF/6mF/60mF	±(4% rdg + 3 dgt)
Hz (through A mode)	600Hz/1kHz/>1kHz	±(1.5% rdg + 5 dgt) / for reference only
Hz (through V mode)	600Hz/6kHz	±(1.5% rdg + 5 dgt)
Temperature	-30°C ~ 0°C (-22°F ~ 32°F)	1°C/2°F	±(5% rdg + 3 dgt)
	0°C ~ 400°C (32°F ~ 752°F)		±(1% rdg + 3 dgt)
	400°C ~ 1000°C (752°F ~ 1832°F)		±(2% rdg + 2 dgt)
	Displays the approximate diode forward voltage	0.001V
	If the measured line resistance is less than 30Ω, the buzzer inside the instruments will sound.		0.1Ω

1 x MR-CM34 Clamp Meter

1 x Test Lead

1 x Temperature Sensor

1 x Warranty Card

1 x Manual

No downloads available.

Highlights